AES 7170 Especificações descarregar pdf (Página 19)

40-7170 Revision 2B July 6, 2012

Figure N – HyperTerminal - COM Properties

6. You are now ready to use HyperTerminal.

Figure O – HyperTerminal

A.2. Optionally, Configure Telix (in DOS) to communicate with the 7170:

1. Locate and start the Telix program. Example: (assuming Telex.exe is in C:\Telix)

CD\Telix<Enter> then Telix<Enter>.

2. Pres <Alt> P to bring up the Com Parameters window.

3. Change communication parameters to 19200,N,8,1,COM<X> where COM<X> is

the COM port you are connected to. Press <F> then <O> to set communication

parameters. Press the number corresponding to the COM Port then press <Enter>

to set Com port and exit parameters window.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Sem comentários

AES 7170 Especificações Página 19