AES 7170 Manual do Utilizador descarregar pdf (Página 40)

40-7705I-UM Page 40 Rev 4 March 16, 2007

Some Alarm automation systems may not be configured to

properly report these types of messages. You may have some

other reason not to send these to automation but, be aware, these

are important messages as they indicate zones that are possibly

stuck, improperly configured, improperly wired or in an alarm

condition and may not be able to report a new event.

Options are:

 Individual Subscriber Unit settings control delivery… , which is

configured for each Subscriber in its configuration settings.

 Deliver all old alarms… , which will ignore Subscriber

configuration and report all old alarms to automation.

 Never deliver old alarms… , which will ignore Subscriber

configuration and not report all old alarms to automation.

Once you have entered data in all the required fields, click .

If you selected Universal Unit ID Range, the following

screen appears.

Figure 6-6 Add a Business Unit – Universal IPLinks

Enter the ID or IDs of the IP-Link Transceivers that will handle the

Subscribers for this Business Unit.

When complete click…

The following screen, or one similar if Alarm Automation System were

not checked should be presented. After reviewing the information,

Click Add Business Unit to complete the process

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 110 111

Sem comentários

AES 7170 Manual do Utilizador Página 40